Library

We have an extensive library of various bOS configuration examples. Select your heating pump, AC, TV or almost any other device and import it to your smart building configuration. We also encourage all system integrators and DIYs to add their own examples to ComfortClick library.

Smart control panel for Komfovent Domekt 200-V heat recovery unit. Ready to be fixed on a wall, surface mounted or recessed mounted. Magnetic holders allow you to fix the controller directly on to the unit.

• Manufacturer: Komfovent
• Product name: Komfovent C4
• Website: Komfovent website
• Manual: C4 manual

Device preparation

Supply air temperature sensor B1 must be installed in the duct of supplied air to the premises, past all the additional air heating/cooling equipment (if any). It is recommended to install the sensor in the straight segment of the air duct within the distance of 5 duct diameters in front and after the sensor. Make sure to read the instructional manual and make sure to follow the instructions with provided images on how to install the ventilation unit.

Configuration

Download the example from our website and import it into your configuration. Step by step instructions on how to import are available in our instructional video.

Unit can also be controlled using RS-485 connection and Modbus RTU or connect a Ping2 module and use Modbus TCP. Warning texts for all the modes are implemented as well, for easier visualisation integration. Once the example is imported, check if the values are displayed correctly, if the values are incorrect, use the scale factor option under each address to display the values normally.